The new A3Ei WIFI Access Point/Bridge is 802.11b,g,n 2.4 GHz broadcast & 5 GHz 802.11a/n/ac backhaul. Includes built-in 5GHz antenna, 1 PoE Adapter, mounting kit, 1 x built-in 2.4GHz 12 dBi 3x3 MIMO sector antenna and 1 x built-in 5GHz 13 dBi 3x3 MIMO sector antenna. The Altai A3Ei WiFi Access Point is designed to be used in Altai A8 WiFi cellular systems to increase system capacity, extend coverage and fill-in low signal areas that are blocked by terrain or buildings. Can be used as a standalone access point for campus area coverage. Operating as an Access point.
The A3Ei employs the cellular concept of expanding system capacity by dividing the coverage area of an A8 WiFi Cellular Base Station. It enables network operators to take advantage of the cost savings provided by the A8 WiFi Cellular Base Station's 300-500% greater coverage area when initially installing a WiFi system.
As system capacity needs to increase, the A2 can be used to expand system capacity over 300%. The A2 can be installed exactly where the capacity requirement is the greatest.
The A3Ei has both a high capacity 2.4 GHz broadcast radio and a 5 GHz backhaul radio not only to expand in-system capacity but also to extend the range of a WiFi system. The 5 GHz backhaul of A2 can be connected directly to an A8 or an Altai A2 Bridge radio to create a high capacity WiFi system.
The A3Ei can also be used as a standalone Access Point for smaller system. It can be a cost effective alternative for smaller coverage areas where the coverage of an A8 WiFi is not required.
A3Ei is combined with the A8 WiFi Cellular Base Station and the A0 WiFi Bridge, it can be used to create the most cost-effective high capacity WiFi system possible.
1 year warranty