CyberData SIP Loudspeaker Amplifier (PoE) (011405)
The SIP Loudspeaker Amplifier is a Power-over-Ethernet (802.3at) Voice-Over-Internet-Protocol (VoIP) paging device and loud ringer for use in places that need loud paging. It provides an easy method for implementing an IP-based overhead paging system for your existing or new VoIP Phone system.
The SIP Loudspeaker Amplifier can have one or two 011471 IP66 Analog Horns attached. See more details in the CyberData Operations Guide or under the Installation tab on the CyberData website.
CyberData has maintained one of the most comprehensive lists of IP PBX servers certified to work with CyberData VoIP products
Features
- Support for security code access for SIP paging
- Autoprovisioning via HTTPS
- HTTPS web based configuration
- 802.11q VLAN tagging
- Configurable event generation for device health and status monitoring
- 9 user-uploadable page messages
- Line-in for background music
- Line-out connector
- DTMF controlled relay
- Digital and manual volume control
- Loud ringer - second SIP extension
- 10 channel prioritized Multicast ports
- Receives pages directly from Polycom phones
- SIP and simultaneous Multicast
- Direct 8 Ohm speaker drive
- Auto-call voice message from input port sense
- HTTP Command Interface
- Built-in diagnostics
- Delayed page support - buffer call
- Cisco SRST
Additional Features
CyberData warrants its product against defects in material or workmanship for a period of two years from the date of purchase.
Should the product fail within Warranty, CyberData will repair or replace the product free of charge based on CyberData's RMA evaluation of the failure mode. These warranties include all parts and labor.
Should the product fail “Out of Warranty,” a flat rate repair charge of one half of the purchase price of the product will be assessed (or one half of MSRP if no proof-of-purchase from an authorized distributor or reseller).
Ethernet I/F | 10/100 Mbps | |
Protocol | SIP RFC 3261 Compatible | |
Power Input | PoE 802.3at or 802.3af | |
Audio Output | 802.3at: 117.9 (+/- 0.2) dBC @1M and 1kHz* 802.3af: 115.1 (+/- 0.2) dBC @1M and 1kHz* | |
Line In: Input Signal Amplitudes Input Impedance | 2.0 VPP Maximum 10k Ohm | |
Line Out: Output Signal Amplitudes Output Level Total Harmonic Distortion Output Impedance | 2.0 VPP Maximum +2dBm nominal 0.5% maximum 10k Ohm | |
On-Board Relay | 1A @ 30 VDC | |
Payload Types | G.711 a-law, G.711 µ-law, G.722, and G.729 | |
Enclosure | UL 94-HB flame resistant, IK 08 Impact-rated, IP66 enclosure | |
Operating Range | Temperature: -40 degrees C to 55 degrees C (-40 degrees F to 131 degrees F) Humidity: 5-95%, non-condensing | |
Storage Temperature | -40 degrees C to 70 degrees C (-40 degrees F to 158 degrees F) | |
Storage Altitude | Up to 15,000 ft. (4573 m) | |
Dimensions** | 10 in. [254 mm] Length 4 in. [101.6 mm] Width 14 in. [355.6 mm] Height | |
Weight Boxed Weight | 3.6 lbs. [1.63 kg] 4.6 lbs. [2.1 kg] | |
Compliance | CE; EMC Directive – Class A EN 55032 & EN 55024, LV Safety Directive – EN 60950-1, RoHS Compliant, FCC; Part 15 Class A, Industry Canada; ICES-3 Class A, IEEE 802.3 Compliant | |
Warranty | 2 Years Limited | |
Part Number | 011405 |
*When used with the optional 011471 IP66 Analog Horn (sold separately)
**Dimensions are measured from the perspective of the product being upright with the front of the product facing you.