Planet IPOE-E305

Physical Port

• Three 10/100/1000BASE-T Gigabit RJ45 ports
  • 1-port data + power input
  • 2-port data + power output

Power over Ethernet

• 1-port data + power input
  • Complies with IEEE 802.3bt PoE++ Type 4 standard PD
  • Compatible with PoH (Power over HDBASE-T) protocol
  • Backward compatible with IEEE 802.3at PoE+ end-span or mid-span PD
  • Supports PoE input power up to 95 watts
• 2-port data + power output
  • Complies with IEEE 802.3bt Power over Ethernet Plus Plus Type 3 PSE standard
  • Up to 2 IEEE 802.3at/802.3bt PoE devices powered
  • Supports total PoE budget up to 65 watts for 2 PoE output ports
  • Auto detects powered device (PD)
• Extends the range of PoE to an additional 100 meters (328ft.)
• Forwards both Ethernet data and PoE power to remote device 

Layer 2 Features

• Hardware-based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode, flow control, auto-negotiation and auto MDI/MDI-X
• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
• IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
• Integrates address look-up engine, supporting 2K absolute MAC addresses
• 9K jumbo frame support in 1000Mbps duplex mode
• Automatic address learning and address aging

Industrial Case and Installation

• IP67-rated aluminum case 
• Wall-mount design
• Supports 6KV DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
• No external power cable required for installation
• Plug and Play installation